IMPRIMANTE INDUSTRIALE

Zebra ZT410 Support

Drivere, documentație, tutoriale, depanare și produse compatibile pentru modelul selectat.

ModelZT410 BrandZebra StareLegacy
Vezi produsul
Zebra ZT410
Ai nevoie de ajutor? Întreabă asistentul AutoID AI despre Zebra ZT410 Vezi pagina de suport

Asistentul AI poate să greșească. Consultă un tehnic AutoID.

Getting Started

Pornește corect cu ZT410

The Setup guidelines below will take you to English documentation. You can access the localized User Guides in the DOCUMENTATION tab. IMPORTANT! Do not connect your printer to a computer yet! If you connected your printer to a computer via USB before driver installation, the printer might appear as an unknown (unspecified) device in “Devices and Printers.” If necessary, follow these recovery steps before proceeding to Step 1. 1. Download and install the recommended Windows Printer Driver v10. Download the driver from the DOWNLOADS tab.Follow instructions in Installing Drivers and Connecting to a Windows-based Computer. 2. Download and install the Zebra Setup Utilities (ZSU) printer configuration utility. How to download and install ZSU 3. Connect the printer. Connect the printer to a USB port on your computer. Connect the printer to your wireless network (Wi-Fi).Connect the printer to your network through the Ethernet port.Connecting the Printer to a Phone or Tablet. 4. Load media (media usually means labels, but it also includes tag stock, receipt paper, and other things that can be printed on). You can watch the English video. Some non-English videos are available in the VIDEOS tab.The media settings must match the actual media that you are using. How to identify media type.For accurate media detection, you may need to adjust the position of the reflective sensor. Review Positioning the Moveable Sensor section in the article. 5. When using thermal transfer media, load the ribbon. You can watch the English video. Some non-English videos are available in the VIDEOS tab.How to find out if you have thermal transfer media? Do a media scratch test to determine the type of media..This printer uses a ribbon coated with ink on the outside. How to find out which side of the ribbon is coated? Perform an adhesive test or a ribbon scratch test. 6. Print a test label. 7. Calibrate ribbon and media sensors. When changing the size or type of media. If printing issues are observed, such as skipped labels, vertical image/label drift, or ribbon out or media out errors.You can watch the English video. Some non-English videos are available in the VIDEOS tab. 8. The printer settings must match the supplies you use for your print job. Adjust the printer settings using Zebra Setup Utilities software or Windows Printer Driver v8.

Ai nevoie de ajutor?

Contact suport AutoID

Dacă nu găsești procedura sau resursa potrivită, echipa AutoID poate verifica modelul și SKU-ul.

Contactează suportul